Living in Victoria means you get to enjoy the ocean breeze, mild weather, and stunning nature. But it also means you’re dealing with a lot of moisture. And where there’s moisture, there’s mold. Mould gives a bad look. It smells, it wrecks your stuff, and it can mess with your health. If you’ve spotted black spots on the wall or that musty basement smell won’t quit, you’ve probably got a mold problem. Getting rid of mold is doable; you just need to know how to do it properly. At SWIPE, we’ve been helping people tackle mold in Victoria homes for years. Here’s how to get it done right and how to stop it from coming back!
Step-by-step Process of Mold Removal Victoria BC
First things first, don’t just spray bleach on the mould and walk away. That won’t fix the problem, and in some cases, it can make the issue worse. Mold is sneaky. It hides in drywall, under floors, and behind furniture. You need to deal with the source, not just the surface.
Start by taking an objective assessment of your home. Look for signs of mold like dark patches, peeling paint, or a damp smell. Check places like bathrooms, basements, behind furniture, and under sinks. If you’re not sure, a moisture meter can help. Better yet, call someone experienced in mold remediation in Victoria. We know the usual hiding spots and what to look for.
Once you’ve found the mould, don’t start ripping things out right away. You need containment. That means sealing off the affected area with plastic sheeting and tape. Close the doors, shut off fans, and if possible, use an air scrubber or HEPA vacuum to control any mold spores floating around. You don’t want mold spreading to other rooms while you’re trying to clean one.
After the mouldy areas have been contained, you can get to removing. If the mould is on a non-porous surface like tile or glass, you can clean it with a good antimicrobial cleaner. Scrub hard, rinse well, and make sure that the surface dries completely. But if it’s on drywall, carpet, or insulation, you’re going to need to remove and replace those materials. Mould gets deep into porous surfaces and can’t be fully cleaned.
At the end of the process, dry everything thoroughly. Use fans, dehumidifiers, and open windows if it’s not too humid outside. You want the moisture gone so the mold doesn’t come right back. Once it’s dry and cleaned up, you can rebuild anything that needs to be fixed.
Keeping Mold Out of Your Home for Good
When you finally get rid of the mould in your home, you want to make sure that it doesn’t come back. In a place as damp as Victoria, prevention is everything.
Start by dealing with moisture. Mold needs moisture to grow, so if you can keep your home dry, you’re already ahead. Check your home for leaks regularly. Look at your roof, gutters, and plumbing. Even a small drip under the sink can turn into a mess if ignored.
Ventilation is also important. Use exhaust fans in bathrooms and kitchens every time you cook or shower. If you don’t have any, make sure you get some installed. You’ll also want to ensure that all ventilation is directed outside not into your attic! You’d be surprised how many homes in Victoria have moldy attics because of poor venting.
If your basement is damp, run a dehumidifier. You’ll want to keep humidity levels under 50 percent. You can get cheap humidity monitors at any hardware store.
It’s also worth keeping your home tidy and dry. Don’t shove furniture up against walls where air can’t move. Don’t leave wet clothes or towels sitting around. Make sure you’re not overwatering your house plants. And if something floods, clean and dry it right away.
Another way to ensure mould stays gone is to check the outside of your house. Make sure that water drains away from your foundation. Gutters and downspouts should direct water far from your walls. If the land slopes toward your house, the mould will come back eventually.
Call Experts in Mold Removal Victoria BC Today!
If you’ve got mold in your home, don’t ignore it. It won’t go away on its own. And the longer you leave it, the worse it gets. If you’re not sure where to start or it feels like too much, call someone local who knows mold removal Victoria BC. We’ve seen everything from little bathroom spots to whole basements covered in mould. No job’s too small or too big to take seriously.
Contact us at SWIPE Contracting today to learn more about mould removal Victoria BC. We look forward to helping you out!